Home  > INFO CENTER  > News  >  Mosaic Tile’s Installation

Mosaic Tile’s Installation

2020-01-03

Installation

1. Apply a premium grade white thin-set mortar using a 3/16 inch V-notch trowel.

2. Set tiles, apply pressure or tap the surfaces with a rubber grout float to ensure all tiles are bonded and aligned properly. Use a level periodically to check the grout joints.
3. After 24 hours, mix and apply grout. ( Read important information below)
-Tiles with metal or glass- USE UNSANDED GROUT
It's very important to understand any abrasive materials or chemicals can scratch the surface of your tile.
-Natural stone and ceramic-USE SANDED GROUT
4. Clean all excess grout immediately with a damp sponge. After 12 hours polish any remaining grout haze with a clean dry cloth.

 

Cutting

A wet saw is recommended to cut mosaic tiles. A premium glass diamond blade is recommended for glass cutting. Other mosaics such as ceramic, natural stone, and metal use a standard diamond blade.


Sealing

Mosaics containing natural stone should be sealed prior to grouting. Use a premium penetrating sealer for a natural look. To darken and highlight the natural elements of the stone, use a stone enhancing sealer. Never allow sealers to dry on glass, glazed ceramic or metal.

 

Care and cleaning

Use a soft cloth or sponge with warm water or any non-abrasive mild detergent.





暂无友情链接数据
Chat Online 编辑模式下无法使用
Chat Online inputting...