Direction for use mosaic tiles

Installation

1. Apply a premium grade white thin-set mortar using a 3/16 inch V-notch trowel.

2. Set tiles, apply pressure or tap the surfaces with a rubber grout float to ensure all tiles are bonded and aligned properly. Use a level periodically to check the grout joins.

3. After 24hrs mix and apply grout. (read important information below)

●Tiles with metal or glass-USE UNSANDED GROUT

It is very important to understand any abrasive materials or chemicals can scratch the surface of your tile.

●Natural stone and ceramic-USE SANDED GROUT

4. Clean all excess grout immediately with a damp sponge. After 12hrs polish any remaining grout haze with a clean dry cloth.

Cutting

A wet saw is recommended to cut mosaic tiles. A premium glass diamond blade is recommended for glass cutting. Other mosaics such as natural stone, ceramic, and metal use a standard diamond blade.

Sealing

Mosaics containing natural stone should be sealed prior to grouting. Use a premium penetrating sealer for a natural look. To darken and highlight the natural elements of stone, use a stone enhancing sealer. Never allow sealers to dry on glass, glazed ceramic or metal.

Care and cleaning

Use a soft cloth of sponge with warm water or any non-abrasive mild detergent.

27^th, June 27, 2019

Foshan Bayard Industry Co., Ltd